How to paint the exterior of your house properly?

The exteriors of the old buildings need constant protection reference. It is only by painting the surface again that you can make it last. To get the best results, you need to do the right preparation. And the TWELVE steps of preparation are what it takes.

Twelve professional painting steps will solve your need to paint the exterior of your property. External painting enhances the value of the property and gives it a pleasing appearance.

How to Paint an Exterior Successfully: 12 Rightful Steps

Melbourne homeowners take great care to ensure that their residential complexes match their aesthetic tastes.

Step 1

Cleaning the walls with pressure washers

Paint must be applied uniformly and evenly to the entire surface of the wall. To remove dirt and dust that has accumulated for a long time, is the first step. A pressure washer is used to remove all of the grime. Pressure washing should be done before painting the exterior. It is done in a precise and controlled way, moving the washer in straight line from top-to-bottom of the exterior. Each stroke is repeated eight times until the surface of the wall is completely clean.

Step 2

Scratched Surfaces: How to Repair them

Exterior Painting involves removing cracks and gaps. This is followed by a quick inspection of any damaged areas on the exterior walls. Detailled notes are taken on the metal and wood that has been broken, the stucco and masonry. Using a spackle knive, apply the epoxy to the cracks and holes. After it has dried out, light sanding is done with a medium-grit stone.

Step 3

Remove Loose Pain

After the paint has dried on the exterior, you should do another inspection. Look for chips or loose paint. Place drop cloths in a straight line along the surface. Remove the loose or chipped paint using a medium gritty sanding board or paint scraper.

Step 4

Sanding the floor and washing it

Paint will not adhere to surfaces that are untidy or rough. After thoroughly cleaning and trimming, the surface will be allowed to air dry before being sanded. Sanding, scraping and peeling off the loose paint are all essential.

Step 5

Trimming off the caulk

With exterior caulk gun, and caulk you can fill in any gaps that are visible between the houses. With the same ingredients the windows and the doors are well-trimmed. Caulk will be applied over the surfaces met by the different materials.

Step 6

Priming Stains

Exterior walls are checked for wood knots and visible stains. After that, primer is painted on with a paintbrush. This blocks the stain.

Step 7

Exterior Lights and Windows are Protected

The light fixtures and windows can be protected using painters’ tap and plastic sheets.

Step 8

Paint the Exteriors

The paint sprayer should be filled with the color of your choice, whether it is eggshell or flat. According to the intensity of color, either one or two layers of eggshell or exterior flat paints will be applied on the entire home. Painting technique is the exact same from top to the bottom. Each stroke must overlap by eight inches. The primer coat is the best way to ensure that you get a wide and even coverage. The primer is used to demonstrate the change of exterior paint from dark color to light or vice versa. Primer coats are only used for the first painting, and not when repainting.

Step 9

Combine multiple cans to create a new color

Many cans of paint in the same shade are mixed into a five gallon container. This ensures that the exterior is painted uniformly. This is the entire process, which is known as boxing the painting. The professionals are experts when it comes to following the method.

Step 10

Painting from top to bottom

When applying paint, it’s best to begin at the very top and then roll the brush down the surface. This will help control streaks. This method requires painters to work with extreme gravitation and never change their painting technique. Smoothness is lost as the painter exhausts his energy by painting from top to bottom. Drips are a necessity at certain times. It is essential to keep the paint brush full as it will allow the painter a smoother finish in the working direction.

Step 11

Painting the door trims and doors

After removing any plastic sheeting from the light fixtures or windows and doors, apply two coats semi-glossy to the woodwork. Then, remove the dropcloths.

Step 12

Sealing remaining paint at end

The remainder of paint is kept from drying. After painting, open paint cans with lids are sealed. To close the lid, use a light hammer to close it with the rubber mallet. To make sure the seal is as tight as possible, you can add a plastic wrapping film over the opening. The remaining paint will be used in interior painting.

Leave a Reply

Your email address will not be published. Required fields are marked *